The following Checks and Work is carried out in accordance with the latest maintenance manual specifications

UNDERBODY
Body to chassis mountings - check security
Cab to body junction - check
Underbody auxiliaries - check
Spare wheel retainer - check operation and lubricate
Corner steadies and folding steps (where applicable) - check operation and lubricate
Chassis - lubricate axle tube (AL-KO) and inspect non-original suspension components
BODYWORK
Damp test - carry out and note readings on separate report
Body panels - check and report on any damage and sealant condition
Floor - check for de-lamination
Door locks and hinges - check operation and lubricate
Body attachments - check security (including ladders, cycle racks, lockers, aerials, satellite dishes, etc)
Cab seat - check operation (swivel type or bed configuration only)
Furniture - check condition and operation (including hinges, stays, etc)
Windows seals and blinds - check operation and condition
Rising roof - check operation (where applicable)
12V ELECTRICS
12N and 12S plugs/cables (where applicable) - check condition and test
Road lights and reflectors - check condition and operation
Fridge - check operation
Interior lighting and equipment - check operation
Habitation battery (where fitted) - check operation, security, electrolyte level and lubricate terminals
Wiring earths and fuses - inspect condition and correct fuse rating
Awning light and outside pump socket - check condition and operation
Fan master - test
MAINS ELECTRICS
Inlet plug, hook-up cable (when available), earth bonding and RCD operation - check
Outlets and permanent connections - carry out visual and functional check
GAS (FRIDGE NOT SERVICED UNLESS REQUESTED)
Regulator - check performance
Carry out gas leak check
Appliances (including water heater, cooker, heating and fridge) - check operation
Pipe work - check operation and replace flexible hose and clips when necessary
Flame failure device - check operation
Cylinder - check security
Gas dispersal holes - check for blockage  
WATER SYSTEM
Water pump, pressure switch and heater - check operation and clean grit filter
Taps, micro-switch, valves, pipes and tank (if fitted) - check condition and operation
Water filter and housing - check for leaks and replace filter if necessary
Waste system - check for leaks
Toilet - check seals, flush and blade operation
Drain down - winter only
VENTILATION
Ventilation openings - check for obstruction and free flow of air
Adjustable ventilators - check for function
Roof lights - check to ensure free of obstructions
FIRE SAFETY
DIY additions - check operation and safety
Security and smoke alarms - check operation
Extinguisher (if fitted) - check correct type fitted and expiry date
Fire blanket (if fitted) - check location and fixing  

And finally ensure vehicle is in an acceptable condition for handover